Table of Contents
Advertisement
2.
Create a group and add IDS servers to the group.
Each IDS server must be connected directly to a different switch port or VLAN. If the IDS
group will be configured for link health check, match the IDS server number to the physical
port number (1 to 9) to which it is connected. For ICMP health check, the IDS server number
can be between 1 and 31.
>> # /cfg/slb/group <group number>
>>Real Server Group # add 1
>>Real Server Group # add 2
3.
Define the IDS server load balancing group.
>> # /cfg/slb/adv/idslb <group number>
4.
Enable the IDS ports for the clients.
>> # /cfg/slb/port 5
>> SLB port 5# idslb ena
>> SLB port 5# ../port 6
>> SLB port 6# idslb ena
5.
Define the group health check.
If you implemented IDS without an IP address, link health check is specifically developed for
IDS load balancing. Use ICMP health check if your IDS servers are configured with an IP
address.
>> # /cfg/slb/group <group number>/health link
6.
Apply and save your changes.
>> Real server group 1# apply
>> Real server group 1# save
212777-A, February 2002
Web OS 10.0 Application Guide
(Define a group)
(Add IDS server 1)
(Add IDS server 2)
(Select the group with the IDS servers)
(Select IDS port 1)
(Enable IDS on port 1)
(Select IDS port 2)
(Enable IDS on port 2)
Chapter 6: Server Load Balancing
n
165
Advertisement
Table of Contents
