10.
Configure the filters to allow local subnet traffic on the dirty side of the VPN device to
reach the VPN device interfaces.
>> # /cfg/slb/filt 100
>> # ena
>> # sip any
>> # dip 192.168.10.0/dmask 255.255.255.0
>> # ../filt 110
>> # ena
>> # sip any
>> # dip 224.0.0.0/dmask 255.0.0.0
11.
Create the redirection filter and enable firewall load balancing.
This filter will redirect inbound traffic, among the defined real servers in the group.
>> # /cfg/slb/filt 224
>> # ena
>> # sip any
>> # dip any
>> # proto any
>> # action redir
>> # ../filt 224/adv
>> # fwlb ena
12.
Add filters to the ingress port.
>> # /cfg/slb/port 1
>> # filt ena
>> # add 100/add 110/add 224
13.
Apply and save the configuration and reboot the switch.
>> # apply
>> # save
>> # /boot/reset
212777-A, February 2002
Chapter 14: Virtual Private Network Load Balancing
Web OS 10.0 Application Guide
n
367