Table of Contents
Advertisement
Web OS 10.0 Application Guide
The command to enable or disable ICMP message type filtering is entered from the Advanced
Filtering menu as follows:
>> #
>> Filter 1 Advanced#
For any given filter, only one ICMP message type can be set at any one time. The any option
disables ICMP message type filtering. The list option displays a list of the available ICMP
message types that can be entered.
N
OTE
cache-enabled and cache-disabled filters to the same switch port. For more information, see
"Cache-Enabled versus Cache-Disabled Filters" on page
n
202
Chapter 7: Filtering
/cfg/slb/filt <filter number>/adv
–
ICMP message type filters must be cache-disabled. Exercise caution when applying
icmp <message type|number|any
list>
|
178.
212777-A, February 2002
Advertisement
Table of Contents
