Table of Contents
Advertisement
Configuring OSPF for Host Routes on Web Switch #1
1.
Configure basic SLB parameters.
Web switch 1 is connected to two real servers. Each real server is given an IP address and is
placed in the same real server group.
>> # /cfg/slb/real 1
>> Real server 1 # rip 100.100.100.25
>> Real server 1 # ena
>> Real server 1 # ../real 2
>> Real server 2 # rip 100.100.10.26
>> Real server 2 # ena
>> Real server 2 # ../group 1
>> Real server group 1 # add 1
>> Real server group 1 # add 2
>> Real server group 1 # enable
>> Real server group 1 # ../on
2.
Configure client and server processing on specific ports.
>> Layer 4# port 4
>> SLB Port 4 # client ena
>> SLB Port 4 # ../port 5
>> SLB Port 5 # server ena
3.
Enable direct access mode.
>> Layer 4 Port 5# ../adv
>> Layer 4 Advanced# direct ena
>> Layer 4 Advanced# ..
4.
Configure the primary virtual server.
Alteon Web Switch # 1 will be preferred for virtual server 10.10.10.1.
>> Layer 4 # virt 1
>> Virtual server 1 # vip 10.10.10.1
>> Virtual server 1 # ena
>> Virtual server 1 # service http
>> Virtual server 1 http service # group 1
212777-A, February 2002
Web OS 10.0 Application Guide
(Select menu for real server 1)
(Set the IP address for real server 1)
(Enable the real server)
(Select menu for real server 2)
(Set the IP address for real server 2)
(Enable the real server)
(Select menu for real server group 1)
(Add real server 1 to group)
(Add real server 2 to group)
(Enable the group)
(Turn SLB on)
(Select switch port 4)
(Enable client processing on Port 4)
(Select switch Port 5)
(Enable server processing on Port 5)
(Select the SLB advance menu)
(Enable DAM)
(Return to the SLB menu)
(Select menu for virtual server 1)
(Set the IP address for virtual server 1)
(Enable the virtual server)
(Select menu for service on virtual server)
(Use real server group 1 for http service)
Chapter 4: OSPF
n
93
Advertisement
Table of Contents
