Table of Contents
Advertisement
4.
Select the appropriate load-balancing metric for the real server group.
>> # /cfg/slb/group 2/metric hash
n
If embedding an IP address in the cookie, select roundrobin or leastconns as the
metric.
n
If you are not embedding the IP address in the cookie, select hash as the metric in con-
junction with a cookie assignment server.
While you may experience traffic concentration using the hash metric with a cookie
assignment server, using a hash metric without a cookie assignment server will cause
traffic concentration on your real servers.
5.
Enable cookie-based persistence on the virtual server service.
In this example, cookie-based persistence is enabled for service 80 (HTTP).
>> # /cfg/slb/virt 1/service 80/pbind
Current persistent binding mode: disabled
Enter cookie|sslid|disable persistence mode: cookie
Once you specify cookie as the mode of persistence, you will be prompted for the following
parameters:
Enter insert|passive|rewrite cookie persistence mode [i/p/r]: p
Enter cookie name: CookieSession1
Enter starting point of cookie value [1-64]: 1
Enter number of bytes to extract [0-64]: 8
Look for cookie in URI [e|d]: d
Set multiple response count [1-16]: 1
n
Cookie-based persistence mode: insert, passive or rewrite
n
Cookie name
n
Starting point of the cookie value
n
Number of bytes to be extracted
n
Look for cookie in the URI [e | d]
If you want to look for cookie name/value pair in the URI, enter e to enable this option. To
look for the cookie in the HTTP header, enter d to disable this option.
212777-A, February 2002
Web OS 10.0 Application Guide
(Select hash as server group metric)
Chapter 16: Persistence
n
431
Advertisement
Table of Contents
