Table of Contents
Advertisement
Web OS 10.0 Application Guide
Health check is performed using:
GET /index.html HTTP/1.1
Host: jansus
Example 4:
hname
dname
content = index.html
Health check is performed using:
GET /index.html HTTP/1.0 (since no HTTP HOST: header is required)
Example 5:
hname
dname
content = //everest/index.html
Health check is performed using:
GET /index.html HTTP/1.1
Host: everest
Configuring the Switch for HTTP Health Checks
Perform the following on the switch to configure the switch for HTTP health checks:
1.
Select the real server group.
>> # /cfg/slb/group 1
2.
Set the health check type to FTP for the real server group.
>> # /cfg/slb/group 1/health http
3.
Configure the health check content.
>> # /cfg/slb/group 1/content <filename>
4.
Apply and save your configuration.
>> # Real server group 1# apply
>> # Real server group 1# save
n
232
Chapter 10: Health Checking
= (none)
= (none)
= (none)
= (none)
(Select a real server group)
212777-A, February 2002
Advertisement
Table of Contents
