Nortel Web OS Switch Software Application Manual page 336

Web OS 10.0 Application Guide
2. Configure IP interfaces on the secondary clean-side Web switch.
>> # /cfg/ip/if 1
>> # mask 255.255.255.0
>> # addr 10.10.4.11
>> # vlan 4
>> # ena
>> # ../if 2
>> # mask 255.255.255.0
>> # addr 10.10.3.11
>> # vlan 3
>> # ena
>> # ../if 3
>> # mask 255.255.255.255
>> # addr 10.10.3.12
>> # vlan 3
>> # ena
3. Turn STP off for the secondary clean-side Web switch.
>> # /cfg/stp/off
4. Configure static routes on the secondary clean-side Web switch.
>> # /cfg/ip/frwd/route
>> # add 10.10.2.1 255.255.255.255 10.10.3.3 2
>> # add 10.10.2.2 255.255.255.255 10.10.3.4 3
>> # add 10.10.2.11 255.255.255.255 10.10.3.3 2
>> # add 10.10.2.12 255.255.255.255 10.10.3.4 3
5. Apply and save your changes.
>> # apply
>> # save
>> # /boot/reset
n
336 Chapter 13: Firewall Load Balancing
212777-A, February 2002