Web OS 10.0 Application Guide
VPN Load-Balancing Configuration
Requirements
n
Configure the switch with firewall load balancing. For more information, see
Load Balancing" on page
n
Enable the Return to Sender (RTS) feature on the ports attached to the VPN devices, using
the following command:
>> # /cfg/slb/port <port number>/rts ena
VPN Load-Balancing Configuration Example
The following example uses Alteon Web switches for VPN load balancing. The configuration
is for four Web switches, four subnets, and two VPN devices.
Figure 14-2 VPN Load-Balancing Configuration Example
Build the topology illustrated in
on the following pages.
n
356
Chapter 14: Virtual Private Network Load Balancing
313.
Figure 14-2 on page
356, and configure the switches as shown
"Firewall
212777-A, February 2002