Nortel Web OS Switch Software Application Manual page 210

Web OS 10.0 Application Guide
13. Save your new configuration changes.
>> Layer 4# save
14. Check the SLB information.
>> Layer 4# /info/slb
Check that all SLB parameters are working according to expectation. If necessary, make any
appropriate configuration changes and then check the information again.
N
OTE
take effect immediately, clear the session binding table for the port (see the /oper/slb/
clear command in the Web OS Command Reference).
Delayed Binding for Web Cache Redirection
To configure delayed binding on your Web switch for WCR only, use the following command:
>> #
For more conceptual information on delayed binding, see
n
210 Chapter 8: Application Redirection
– Changes to filters on a given port only effect new sessions. To make filter changes
/cfg/slb/filt <filter number>/adv/urlp ena
(Save for restore after reboot)
(View SLB information)
"Delayed Binding" on page
212777-A, February 2002
146.