Table of Contents
Advertisement
Use the following commands to configure a proximity table on the Web switch at Site 4:
>> # /cfg/slb/gslb/lookup/lookups ena
>> # dname nortelnetworks.com
>> # network 1
>> # sip 205.178.13.0
>> # mask 255.255.255.0
>> # vip1 <virtual server IP addr of Site 3>
>> # vip2 <virtual server IP addr of Site 1>
>> # ../network 2
>> # sip 204.165.0.0
>> # mask 255.255.0.0
>> # vip1 <virtual server IP add of Site 4
>> # vip2 <virtual server IP add of Site 2
N
OTE
Using this configuration, the DNS request "nortelnetworks.com" from 205.178.13.0 will get a
DNS response with only the virtual server IP address of Site 1, if Site 1 has less load than
Site 3.
212777-A, February 2002
–
For each client subnet, add only one static entry.
Web OS 10.0 Application Guide
(Enable the lookup or proximity table
(Select the domain name
(Select Client A subnet
(Assign source address for Client A
(Assign the mask for Client A
(Select preferred Site 3
(Select preferred Site 1
(Select Client B subnet
(Assign source address for Client B
(Assign the mask for Client B
>
(Select preferred Site 4
>
(Select preferred Site 2
Chapter 12: Global Server Load Balancing
)
)
)
)
)
)
)
)
)
)
)
)
n
311
Advertisement
Table of Contents
