Table of Contents
Advertisement
HTTP Header-Based Web Cache Redirection
To configure the switch for WCR based on the "Host:" header, use the following procedure:
1.
Configure basic SLB.
Before you can configure header-based cache redirection, ensure that the switch has already
been configured for basic SLB (see
tasks:
n
Assign an IP address to each of the real servers in the server pool.
n
Define an IP interface on the switch.
n
Define each real server.
n
Assign servers to real server groups.
n
Define virtual servers and services.
2.
Turn on URL parsing for the filter.
>> # /cfg/slb/filt 1/adv/urlp ena
3.
Enable header load balancing for the Host: header.
>> # /cfg/slb/layer7/redir/header ena host
4.
Define the host names.
>> # /cfg/slb/layer7/slb/add ".com"
>> Server Load Balance Resource# add ".org"
>> Server Load Balance Resource# add ".net"
5.
Apply and save your configuration changes.
6.
Identify the string ID numbers with this command.
>> # /cfg/slb/layer7/slb/cur
Each defined string has an associated ID number.
Number of entries: four
ID
1
2
3
4
212777-A, February 2002
SLB String
any
.com
.org
.net
"Server Load Balancing" on page
Chapter 15: Content Intelligent Switching
Web OS 10.0 Application Guide
117)with the following
n
403
Advertisement
Table of Contents
