Table of Contents
Advertisement
To configure the switch for WAN link load balancing:
1.
Define a real server with proxy disabled.
>> # /cfg/slb/real 1
>> Real server 1# ena
>> Real server 1# rip <IP address>
>> Real server 1# proxy dis
2.
Add the real server to a real server group using the response metric.
>> # /cfg/slb/group 1
>> Real server group 1# add 1
>> Real server group 1# metric response
3.
Define the WAN link load balancing redirection filter.
>> Real server group 1# /cfg/slb/filt 1
>> Filter 1# ena
>> Filter 1# action redir
>> Filter 1# group 1
4.
Enable WAN link load balancing for the redirection filter.
>> # /cfg/slb/filt 1/adv/linklb ena
5.
Enable WAN link load balancing proxy for the redirection filter.
>> # /cfg/slb/filt 1/adv/proxy ena
6.
Apply and save your changes.
>> Filter 1 Advanced# apply
>> Filter 1 Advanced# save
212777-A, February 2002
Web OS 10.0 Application Guide
(Select the real server menu)
(Enable real server 1)
(Set the real server IP address)
(Disable proxy)
Chapter 6: Server Load Balancing
n
167
Advertisement
Table of Contents
