Table of Contents
Advertisement
To configure RTSP load balancing using pattern matching, follow this procedure:
1.
Add the URL string.
>> # /cfg/slb/layer7/slb/add <URL string ID> (Add URL string ID, for example,
n
You can remove the URL string by performing the following:
>> # /cfg/slb/layer7/slb
>> Server Load Balance Resource# rem <URL string ID>
n
You can rename the URL string by performing the following:
>> # /cfg/slb/layer7/slb
>> Server Load Balance Resource# rename <URL string ID>
2.
Assign a URL string ID to a real server.
>> # /cfg/slb/real 1
>> Real Server 1 # Layer 7
>> Real Server 1 Layer 7 Commands # addlb <URL string ID (1-128)>
3.
Enable Layer 7 Parsing for RTSP.
>> # /cfg/slb/virt 1 /service rtsp
>> Virtual Server 1 rtsp Service# rtspslb
Current RTSP URL load balancing:
Enter new RTSP load balancing method [hash|pattern|disabled]: pattern
4.
Apply and save the configuration
>> Virtual Server 1 rtsp Service# apply
>> Virtual Server 1 rtsp Service# save
212777-A, February 2002
Web OS 10.0 Application Guide
g2video.rm)
(Remove URL string ID: g2video.rm)
(Rename URL string: g2video.rm)
(
Select the real server)
(Add the string ID for RTSP load
balance)
disabled
Chapter 15: Content Intelligent Switching
n
393
Advertisement
Table of Contents
