Table of Contents
Advertisement
Web OS 10.0 Application Guide
3.
On the switch, select a BWM contract and name the contract.
Each contract must have a unique number from 1 to 256.
>> Policy 1# /cfg/bwm/cont 1
>> BWM Contract 1# name dial-up
4.
Set the bandwidth policy for this contract.
Each BWM contract must be assigned a bandwidth policy.
>> BWM Contract 1# pol 1
5.
Enable this BWM contract.
>> BWM Contract 1# ena
6.
Select the second bandwidth policy.
>> BWM Contract 1# /cfg/bwm/pol 2
7.
Set the hard, soft, and reserved rate limits for this policy, in Mbps.
>> Policy 2# hard 30
>> Policy 2# soft 25
>> Policy 2# resv 20
8.
On the switch, select the second BWM contract and name the contract.
>> Policy 2# /cfg/bwm/cont 2
>> BWM Contract 2# name broadband
9.
Set the bandwidth policy for this contract.
Each BWM contract must be assigned a bandwidth policy.
>> BWM Contract 2# pol 2
10.
Enable this BWM contract.
>> BWM Contract 2# ena
n
458
Chapter 17: Bandwidth Management
(Select BWM contract 1)
(Assign contract name "dial-up")
(Assign policy 1 to BWM Contract 1)
(Enables this BWM contract)
(Select bandwidth policy 2)
(Set "never exceed" rate)
(Set desired bandwidth rate)
(Set committed information rate)
(Select BWM contract 2)
(Assign contract name "broadband")
(Assign policy 2 to BWM contract 2)
(Enables this BWM contract)
212777-A, February 2002
Advertisement
Table of Contents
