Table of Contents
Advertisement
Web OS 10.0 Application Guide
Configuring OSPF for Host Routes on Web Switch 2
1.
Configure basic SLB parameters.
Web switch 2 is connected to two real servers. Each real server is given an IP address and is
placed in the same real server group.
>> # /cfg/slb/real 1
>> Real server 1 # rip 100.100.100.27
>> Real server 1 # ena
>> Real server 1 # ../real 2
>> Real server 2 # rip 100.100.10.28
>> Real server 2 # ena
>> Real server 2 # ../group 1
>> Real server group 1 # add 1
>> Real server group 1 # add 2
>> Real server group 1 # enable
>> Real server group 1 # ../on
2.
Configure the virtual server parameters.
The same virtual servers are configured as on Web switch 1.
>> Layer 4 # virt 1
>> Virtual server 1 # vip 10.10.10.1
>> Virtual server 1 # enable
>> Virtual server 1 # service http
>> Virtual server 1 http service # group 1
>> Virtual server 2 http service # /cfg/slb/virt 2 (Select menu for virtual server 2)
>> Virtual server 1 # vip 10.10.10.2
>> Virtual server 1 # enable
>> Virtual server 1 # service http
>> Virtual server 1 # group 1
3.
Configure IP interfaces for each network that will be attached to OSPF areas.
>> Virtual server 1 # /cfg/ip/if 1
>> IP Interface 1 # addr 10.10.7.2
>> IP Interface 1 # enable
>>
IP Interface 1 # ../if 2
>> IP Interface 2 # addr 10.10.10.41
>> IP Interface 2 # enable
n
96
Chapter 4: OSPF
ble
ble
(Select menu for virtual server 1)
(Set the IP address for virtual server 1)
(Enable the virtual server)
(Select menu for service on virtual server)
(Use real server group 1 for http service)
(Set the IP address for virtual server 2)
(Enable the virtual server)
(Select menu for service on virtual server)
(Use real server group 1 for http service)
(Select menu for real server 1)
(Set the IP address for real server 1)
(Enable the real server)
(Select menu for real server 2)
(Set the IP address for real server 2)
(Enable the real server)
(Select menu for real server group 1)
(Add real server 1 to group)
(Add real server 2 to group)
(Enable the group)
(Turn SLB on)
(Select menu for IP Interface 1)
(Set IP address on backbone network)
(Enable IP interface 1)
(Select menu for IP Interface 2)
(Set IP address on stub area network)
(Enable IP interface 2)
212777-A, February 2002
Advertisement
Table of Contents
