Nortel Web OS Switch Software Application Manual page 214

Web OS 10.0 Application Guide
The following commands can be used to configure the additional unique proxy IP addresses:
>> SLB port 6# ../port 1
>> SLB port 1# pip 200.200.200.70
>> SLB port 1# ../port 2
>> SLB port 2# pip 200.200.200.71
>> SLB port 2# ../port 3
>> SLB port 3# pip 200.200.200.72
>> SLB port 3# ../port 4
>> SLB port 4# pip 200.200.200.73
>> SLB port 4# ../port 7
>> SLB port 7# pip 200.200.200.74
>> SLB port 7# ../port 8
>> SLB port 8# pip 200.200.200.75
N
OTE
See the Web OS Command Reference for more information (/cfg/slb/adv/matrix).
3. Configure the application redirection filters.
Once proxy IP addresses are established, configure each Application Redirection filter (Filter 2
in our example) with the real server TCP or UDP port to which redirected traffic will be sent.
In this case, the requests are mapped to a different destination port (8080). You must also
enable proxies on the real servers:
>> # /cfg/slb/filt 2
>> Filter 2# rport 8080
>> Filter 2# real 1/proxy enable
>> Real server 1# ../real 2/proxy enable
>> Real server 2# ../real 3/proxy enable
N
OTE
configured in a similar fashion. For example, if this had been a DNS redirect, rport would be
sent to well-known port 53 (or the service port you want to remap to). For a list of other well-
known services and ports, see the
4. Apply and save your changes.
5. Check server statistics to verify that traffic has been redirected based on filtering criteria:
>> # /info/slb/group <group number>/filter <filter number>
n
214 Chapter 8: Application Redirection
–
Port 9 does not require a proxy IP address with VMA enabled.
–
This configuration is not limited to HTTP Web service. Other TCP/IP services can be
Web OS Command Reference.
(Select network port 1)
(Set proxy IP address for port 1)
(Select network port 2)
(Set proxy IP address for port 2)
(Select network port 3)
(Set proxy IP address for port 3)
(Select network port 4)
(Set proxy IP address for port 4)
(Select network port 7)
(Set proxy IP address for port 7)
(Select network port 8)
(Set proxy IP address for port 8)
(Select the menu for Filter 2)
(Set proxy redirection port)
(Enable proxy on real servers)
(Enable proxy on real servers)
(Enable proxy on real servers)
212777-A, February 2002