Table of Contents
Advertisement
Web OS 10.0 Application Guide
Number of entries: five
ID
1
2
3
4
5
7.
Add the defined string IDs to the real server using the following command:
>> # /cfg/slb/real 1/layer7/addlb 2
>> # /cfg/slb/real 2/layer7/addlb 3
>> # /cfg/slb/real 3/layer7/addlb 4
N
OTE
dle any request.
Layer 7 RTSP Load Balancing
Earlier versions of Web OS supported hashing to bind a client's request to a real server for
Layer 7 load balancing. As a result, all the real servers carried the same content. In addition to
hashing, Web OS 10.0 allows you to segregate the requests based on the string pattern, match
the strings in the requests, and direct the requests to the assigned servers. For more information
on RTSP, refer to
To configure RTSP load balancing using hash, follow this procedure:
>> # /cfg/slb/virt 1/service 554
>> Virtual Server 1 rtsp Service# rtspslb
Enter new RTSP load balancing method [hash|pattern|disabled]: hash
n
392
Chapter 15: Content Intelligent Switching
SLB String
any, cont 1024
www.[abcdefg]*.com, cont 1024
www.[hijklm]*.com, cont 1024
www.[nopqrst]*.com, cont 1024
www.[uvwxyz]*.com, cont 1024
–
If you don't add a defined string (or add the defined string "any") the server will han-
"Real Time Streaming Protocol SLB" on page 155
212777-A, February 2002
Advertisement
Table of Contents
