Table of Contents
Advertisement
Web OS 10.0 Application Guide
7.
You will see a message verifying that you were authenticated.
8.
Browse to the Web site.
If there are other services running on other servers in the internal network, you should also be
able to reach those services. All of this traffic is traveling over the VPN and is being decrypted
at the VPN device. You can verify which VPN device is being used by looking at the Log
Viewer. You should also be able to see the client authentication as well as the decrypted traffic.
To verify that the FWLB and hash metric is working correctly on the dirty-side switches (that
is, hashed on client IP address/Destination IP address), you can configure your current client
with an IP address one higher (or lower) in the last octet, and try to reestablish the VPN con-
nection. Or, add another PC on the dirty side and connect.
N
OTE
the SecuRemote clients but using a VPN 1 Gateway or other compatible VPN Gateway), you
will not see load balancing across those clients. Each SecuRemote client will be treated differ-
ently, but each VPN 1 Gateway will be treated as one client each (that is, one Client IP
address). VPN Device 1 and VPN Device 2 belong to one cluster IP.
n
370
Chapter 14: Virtual Private Network Load Balancing
–
When many clients are coming from behind a VPN gateway (for example, not using
212777-A, February 2002
Advertisement
Table of Contents
