Table of Contents
Advertisement
5.
Turn on URL-based server load balancing on the virtual server.
Configure everything under the virtual server as in Configuration Example 1.
>> # /cfg/slb/virt 1/service 80/httpslb enable urlslb
If the same string is used by more than one service, and you want to allocate a certain percent-
age of bandwidth to this URL string for this service on the virtual server, then define a rule
using the
>> # /cfg/slb/virt 1/service 80/urlcont <URL path ID> <BW Contract number>
This contract is tied to service 1. The
to the URL string ID.
6.
Enable Server Load Balancing.
>> # /cfg/slb/on
Cookie-Based Bandwidth Management Example
In this example, you will assign bandwidth based on cookies. First, configure cookie-based
server load balancing, which is very similar to URL-based load balancing. Any cookie contain-
ing the specified string is redirected to the assigned server.
Scenario 1: In this scenario, the Web site has a single virtual server IP address and supports
multiple classes of users. Turn on cookie parsing for the service on the virtual server.
>> # /cfg/slb/virt 1/service 80
>> # httpslb enabled cookie sid 1 8 disable
1.
Define one or more load-balancing strings.
>> # /cfg/slb/layer7/lb/add <URL path ID>
Example:
>> # /cfg/slb/layer7/lb/add "Business"
>> # add "First"
>> # add "Coach"
212777-A, February 2002
command.
urlcont
command will overwrite the contract assigned
urlcont
Chapter 17: Bandwidth Management
Web OS 10.0 Application Guide
n
465
Advertisement
Table of Contents
