Feature Implementation - Nortel Communication Server 1000 Manual

60 Attendant Through Dialing Networkwide
Attendant Through Dialing Networkwide also requires one of the following
dialing plans:
•
Flexible Number Plan (FNP) package 160
•
Coordinated Dialing Plan (CDP) package 59
•
Basic Automatic Route Selection (BARS) package 57
•
Network Alternate Route Selection (NARS) package 58

Feature implementation

Table 27
LD 15 Allow Attendant Through Dialing Networkwide.
Prompt Response
REQ: CHG
TYPE: ATT
CUST 0-99
0-31
OPT (ATDA)
Note:
and Calling Line Identification in the Call Detail Recording Record are
optional. Improved End-to-End Signaling sends the digits dialed by
the calling party on the established link in a more efficient manner
than End-to-End Signaling. A Call Detail Recording record on the
outgoing trunk node shows the outgoing trunk in the ID field and the
calling Directory Number in the CLID field if the outgoing trunk is on
the attendant's node.
Table 28
LD 15 Configure Improved End-to-End Signaling.
Prompt Response
REQ: CHG
TYPE: FTR
0-99
CUST
0-31
...
Description
Change existing data.
Attendant Console data block.
Customer number
Range for Large System and CS 1000E system
Range for Small System, CS 1000S system, Media Gateway
1000B, and Media Gateway 1000T
Attendant Through Dialing Allowed (default).
ATDD = Attendant Through Dialing Denied.
The configuration of Improved End-to-End Signaling in LD 15
Description
Change existing data.
Customer Features and options.
Customer number
Large System and CS 1000E system
Range for Small System, CS 1000S system, Media Gateway
1000B, and Media Gateway 1000T
Nortel Communication Server 1000
DASS2 Fundamentals
NN43001-571 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.