Carrier 50PD05 Operating And Service Instructions page 9

Fan Status
If a Fan Status accessory was field installed, the unit must be
configured for it by setting Configuration---_UNIT---_FN.SW to
normally open (1) or normally closed (2). Normally open (1) is the
preferred configuration.
IMPORTANT: Fan Status input is not on the ternfinals marked
Fan Status.
Filter Status
If a Filter Status accessory was field installed, the unit must be
configured for it by setting Configuration--_UNIT--_FL.SW to
normally open (1) or normally closed (2). Nom_ally open (1) is the
preferred configuration.
DISPLAY
MENU
TIMECLOCK
SCH.L
SUBr-] r-]SUB
MODE
PER.1
Table 4 -- Setting an Occupied Time Schedule - Weekdays Only for 7:30 to 22:30
KEYPAD
ITEM DISPLAY
ENTRY
ENTER
ENTER OCC.1
ENTER 00.00
ENTER 00.00
• 07.00
ENTER 07.00
• 07.30
ENTER 07.30
ESCAPE OCC.1 07.30
• UNC.1 00.00
ENTER 00.00
ENTER 00.00
• 22.00
ENTER 22.00
• 22.30
ENTER 22.30
ESCAPE UNC.1 22.30
• MON.1 NO
ENTER NO
• YES
ENTER YES
ESCAPE MON.1 YES
• TUE.1 NO
ENTER NO
• YES
ENTER YES
ESCAPE TUE.1 YES
• WED.1 NO
ENTER NO
• YES
ENTER YES
ESCAPE WED.1 YES
• THU.1 NO
ENTER NO
• YES
ENTER YES
ESCAPE THU.1 YES
• FRI.1 NO
ENTER NO
• YES
ENTER YES
ESCAPE FRI.1 YES
ESCAPE
ESCAPE
ITEM EXPANSION
Local Occupancy Schedule
Period Occupied Time
Period Occupied Time
Period Unoccupied Time
Period Unoccupied Time
Monday In Period
Monday In Period
Tuesday In Period
Tuesday In Period
Wednesday In Period
Wednesday In Period
Thursday In Period
Thursday In Period
Friday In Period
Friday In Period
COMMENT
Scrolling stops
Hours Flash
Select 7
Change accepted, minutes flash
Select 30
Change accepted
Item/Value/Units scrolls again
Scrolling stops
Hours Flash
Select 22
Change accepted, minutes flash
Select 30
Change accepted
Item/Value/Units scrolls again
Scrolling stops
Select YES
Change accepted
Item/Value/Units scrolls again
Scrolling stops
Select YES
Change accepted
Item/Value/Units scrolls again
Scrolling stops
Select YES
Change accepted
Item/Value/Units scrolls again
Scrolling stops
Select YES
Change accepted
Item/Value/Units scrolls again
Scrolling stops
Select YES
Change accepted
Item/Value/Units scrolls again