Verifying Radius Configuration; Displaying Radius Server Statistics - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Configuring RADIUS
Procedure
Step 1
Step 2
The following example shows how to manually send a test message to a RADIUS server:
switch# test aaa server radius 10.10.1.1 user1 Ur2Gd2BH
switch# test aaa group RadGroup user2 As3He3CI

Verifying RADIUS Configuration

To display RADIUS configuration information, perform one of the following tasks:
Procedure
Step 1
Step 2
Step 3
For detailed information about the fields in the output from this command, refer to the Cisco Nexus 5000
Series Command Reference.

Displaying RADIUS Server Statistics

To display the statistics the Cisco Nexus 5000 Series switch maintains for RADIUS server activity, perform
this task:
Procedure
Step 1
The following example shows how to display statistics:
switch# show radius-server statistics 10.10.1.1
OL-16597-01
Command or Action
switch# test aaa server radius {ipv4-address |
ipv6-address | server-name} [vrf vrf-name]
username password
switch# test aaa group group-name username
password
Command or Action
switch# show running-config radius [all]
switch# show startup-config radius
switch# show radius-server [server-name |
ipv4-address | ipv6-address] [directed-request
| groups | sorted | statistics]
Command or Action
switch# show radius-server statistics {hostname |
ipv4-address | ipv6-address}
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
Verifying RADIUS Configuration
Purpose
Sends a test message to a RADIUS server to
confirm availability.
Sends a test message to a RADIUS server
group to confirm availability.
Purpose
Displays the RADIUS configuration in the
running configuration.
Displays the RADIUS configuration in the
startup configuration.
Displays all configured RADIUS server
parameters.
Purpose
Displays the RADIUS statistics.
253