Destination Profiles; Call Home Alert Groups - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Destination Profiles

• Multiple concurrent message destinations. You can configure up to 50 e-mail destination addresses for
Destination Profiles
A destination profile includes the following information:
• One or more alert groups—The group of alerts that trigger a specific Call Home message if the alert
• One or more e-mail destinations—The list of receipents for the Call Home messages generated by alert
• Message format—The format for the Call Home message (short text, full text, or XML).
• Message severity level—The Call Home severity level that the alert must meet before the switch generates
You can also configure a destination profile to allow periodic inventory update messages by using the inventory
alert group that will send out periodic messages daily, weekly, or monthly.
Cisco Nexus 5000 Series switches support the following predefined destination profiles:
• CiscoTAC-1—Supports the Cisco-TAC alert group in XML message format.
• full-text-destination—Supports the full text message format.
• short-text-destination—Supports the short text message format.

Call Home Alert Groups

An alert group is a predefined subset of Call Home alerts that are supported in all Cisco Nexus 5000 Series
switches. Alert groups allow you to select the set of Call Home alerts that you want to send to a predefined
or custom destination profile. The switch sends Call Home alerts to e-mail destinations in a destination profile
only if that Call Home alert belongs to one of the alert groups associated with that destination profile and if
the alert has a Call Home message severity at or above the message severity set in the destination profile.
The following table lists supported alert groups and the default CLI command output included in Call Home
messages generated for the alert group.
Table 43: Alert Groups and Executed Commands
Alert Group
Cisco-TAC
Diagnostic
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
350
each destination profile.
occurs.
groups assigned to this destination profile.
a Call Home message to all e-mail addresses in the destination profile. The Cisco Nexus 5000 Series
switch does not generate an alert if the Call Home severity level of the alert is lower than the message
severity level set for the destination profile.
Description
All critical alerts from the other
alert groups destined for Smart Call
Home.
Events generated by diagnostics.
Configuring Smart Call Home
Executed Commands
Execute commands based on the
alert group that originates the alert.
show diagnostic result module all
detail
show moduleshow version
OL-16597-01