Displaying Tacacs+ Statistics; Verifying Tacacs+ Configuration; Example Tacacs+ Configuration; Default Tacacs+ Settings - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

About Configuring TACACS+

Displaying TACACS+ Statistics

To display the statistics the Cisco Nexus 5000 Series switch maintains for TACACS+ activity, perform this
task:
Procedure
Step 1
For detailed information about the fields in the output from this command, see the Cisco Nexus 5000 Series
Command Reference.

Verifying TACACS+ Configuration

To display TACACS+ configuration information, perform one of the following tasks:
Procedure
Step 1
Step 2
Step 3
Step 4

Example TACACS+ Configuration

The following example shows how to configure TACACS+:
switch# configure terminal
switch(config)# feature tacacs+
switch(config)# tacacs-server key 7 "ToIkLhPpG"
switch(config)# tacacs-server host 10.10.2.2 key 7 "ShMoMhTl"
switch(config)# aaa group server tacacs+ TacServer
switch(config-tacacs+)# server 10.10.2.2
switch(config-tacacs+)# use-vrf management

Default TACACS+ Settings

The following table lists the default settings for TACACS+ parameters.
OL-16597-01
Command or Action
switch# show tacacs-server statistics {hostname |
ipv4-address | ipv6-address}
Command or Action
switch# show tacacs+ {status | pending |
pending-diff}
switch# show running-config tacacs [all]
switch# show startup-config tacacs
switch# show tacacs-serve [host-name |
ipv4-address | ipv6-address] [directed-request
| groups | sorted | statistics]
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
Displaying TACACS+ Statistics
Purpose
Displays the TACACS+ statistics.
Purpose
Displays the TACACS+ Cisco Fabric Services
distribution status and other details.
Displays the TACACS+ configuration in the
running configuration.
Displays the TACACS+ configuration in the
startup configuration.
Displays all configured TACACS+ server
parameters.
267