Call Home Message Levels - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Call Home Message Levels

You can add show commands only to full text and XML destination profiles. Short text destination profiles
do not support additional show commands because they only allow 128 bytes of text.
Related Topics
•
Call Home Message Levels
Call Home allows you to filter messages based on their level of urgency. You can associate each destination
profile (predefined and user defined) with a Call Home message level threshold. The switch does not generate
any Call Home messages with a value lower than this threshold for the destination profile. The Call Home
message level ranges from 0 (lowest level of urgency) to 9 (highest level of urgency), and the default is 0 (
Cisco Nexus 5000 Series sends all messages).
Call Home messages that are sent for syslog alert groups have the syslog severity level mapped to the Call
Home message level.
Call Home does not change the syslog message level in the message text.
Note
The following table lists each Call Home message level keyword and the corresponding syslog level for the
syslog port alert group.
Table 44: Severity and syslog Level Mapping
Call Home Level
9
8
7
6
5
4
3
2
1
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
352
Call Home Message Levels , page 352
Keyword
Catastrophic
Disaster
Fatal
Critical
Major
Minor
Warning
Notification
Normal
Configuring Smart Call Home
syslog Level Description
N/A Network-wide
catastrophic failure.
N/A Significant network
impact.
Emergency (0) System is unusable.
Alert (1) Critical conditions that
indicate that immediate
attention is needed.
Critical (2) Major conditions.
Error (3) Minor conditions.
Warning (4) Warning conditions.
Notice (5) Basic notification and
informational messages.
Possibly independently
insignificant.
Information (6) Normal event signifying
return to normal state.
OL-16597-01