Default Basic Zone Settings - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Default Basic Zone Settings

The following example shows how to display full zoning analysis:
switch# show zone analysis vsan 1
The following example shows how to display active zoning analysis:
switch# show zone analysis active vsan 1
See the Cisco Nexus 5000 Series Switch Command Reference for the description of the information displayed
in the command output.
Default Basic Zone Settings
The following table lists the default settings for basic zone parameters.
Table 80: Default Basic Zone Parameters
Parameters
Default zone policy
Full zone set distribute
Enhanced zoning
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
566
Configuring and Managing Zones
Default
Denied to all members.
The full zone set(s) is not distributed.
Disabled.
OL-16597-01