Verifying Radius Configuration; Displaying Radius Server Statistics - Cisco Nexus 5000 Series Configuration Manual

Verifying RADIUS Configuration

DETAILED STEPS
Command or Action
Step 1
switch# test aaa server radius {ipv4-address | ipv6-address
| server-name} [vrf vrf-name] username password
Step 2 switch# test aaa group group-name username password
The following example shows how to manually send a test message to a RADIUS server:
switch# test aaa server radius 10.10.1.1 user1 Ur2Gd2BH
switch# test aaa group RadGroup user2 As3He3CI
Verifying RADIUS Configuration
To display RADIUS configuration information, perform one of the following tasks:
SUMMARY STEPS
1. switch# show running-config radius [all]
2. switch# show startup-config radius
3. switch# show radius-server [server-name | ipv4-address | ipv6-address] [directed-request | groups |
sorted | statistics]
DETAILED STEPS
Command or Action
Step 1
switch# show running-config radius [all]
Step 2 switch# show startup-config radius
Step 3 switch# show radius-server [server-name | ipv4-address
| ipv6-address] [directed-request | groups | sorted |
statistics]
For detailed information about the fields in the output from this command, refer to the Cisco Nexus 5000
Series Command Reference.

Displaying RADIUS Server Statistics

To display the statistics the Cisco Nexus 5000 Series switch maintains for RADIUS server activity, perform
this task:
OL-20919-01
Manually Monitoring RADIUS Servers or Groups
Purpose
Sends a test message to a RADIUS server to confirm
availability.
Sends a test message to a RADIUS server group to
confirm availability.
Purpose
Displays the RADIUS configuration in the running
configuration.
Displays the RADIUS configuration in the startup
configuration.
Displays all configured RADIUS server parameters.
Cisco Nexus 5000 Series NX-OS Security Configuration Guide
39