About Static Vsan Deletion; Deleting Static Vsans - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Configuring and Managing VSANs

About Static VSAN Deletion

When an active VSAN is deleted, all of its attributes are removed from the running configuration. VSAN-related
information is maintained by the system software as follows:
• VSAN attributes and port membership details are maintained by the VSAN manager. This feature is
Figure 63: VSAN Port Membership Details
• VSAN-based runtime (name server), zoning, and configuration (static routes) information is removed
• Configured VSAN interface information is removed when the VSAN is deleted.
The allowed VSAN list is not affected when a VSAN is deleted.
Note
Any commands for a nonconfigured VSAN are rejected. For example, if VSAN 10 is not configured in the
system, then a command request to move a port to VSAN 10 is rejected.
Related Topics
•

Deleting Static VSANs

To delete a VSAN and its various attributes, perform this task:
OL-16597-01
affected when you delete a VSAN from the configuration. When a VSAN is deleted, all the ports in that
VSAN are made inactive and the ports are moved to the isolated VSAN. If the same VSAN is recreated,
the ports do not automatically get assigned to that VSAN. You must explicitly reconfigure the port
VSAN membership (see the figure below).
when the VSAN is deleted.
Configuring VSAN Trunking, page 507
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
About Static VSAN Deletion
539