Associating An Alert Group With A Destination Profile - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Configuring Smart Call Home
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
This example shows how to modify a destination profile for Call Home:
switch# configuration terminal
switch(config)# callhome
switch(config-callhome)# destination-profile full-text-destination email-addr
person@example.com
switch(config-callhome)# destination-profile full-text-destination message-level 5
switch(config-callhome)# destination-profile full-text-destination message-size 10000
Related Topics
•

Associating an Alert Group with a Destination Profile

To associate one or more alert groups with a destination profile, perform this task:
OL-16597-01
Command or Action
switch# configuration terminal
switch(config)# callhome
switch(config-callhome)#
destination-profile {name |
full-txt-destination |
short-txt-destination} email-addr
address
destination-profile {name |
full-txt-destination |
short-txt-destination} message-level
number
switch(config-callhome)#
destination-profile {name |
full-txt-destination |
short-txt-destination} message-size
number
switch# show callhome
destination-profile [profile name]
switch# copy running-config
startup-config
Associating an Alert Group with a Destination Profile, page 357
Associating an Alert Group with a Destination Profile
Purpose
Enters configuration mode.
Enters callhome configuration mode.
Configures an e-mail address for a user-defined or
predefined destination profile. You can configure up
to 50 e-mail addresses in a destination profile.
Configures the Call Home message severity level for
this destination profile. The switch sends only alerts
that have a matching or higher Call Home severity
level to destinations in this profile. The range is from
0 to 9, where 9 is the highest severity level.
Configures the maximum message size for this
destination profile. The range is from 0 to 5000000
for full-txt-destination and the default is 2500000;
from 0 to 100000 for short-txt-destination and the
default is 4000; 5000000 for CiscoTAC-1, which is
not changeable.
(Optional)
Displays information about one or more destination
profiles.
(Optional)
Saves this configuration change.
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
357