Changing User Role Vsan Policies; Verifying User Accounts And Rbac Configuration - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Changing User Role VSAN Policies

Step 5
Step 6
Changing User Role VSAN Policies
You can change a user role VSAN policy to limit the VSANs that the user can access.
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6

Verifying User Accounts and RBAC Configuration

To display user account and RBAC configuration information, perform one of the following tasks:
Command
switch# show role
switch# show role feature
switch# show role feature-group
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
322
Command or Action
switch# show role
switch# copy running-config
startup-config
Command or Action
switch# configure terminal
switch(config-role)# role name
role-name
switch(config-role)# vsan policy deny
switch(config-role-vsan)# permit vsan
vsan-list
switch# show role
switch# copy running-config
startup-config
Configuring User Accounts and RBAC
Purpose
Repeat this command for as many VLANs as
needed.
(Optional)
Displays the role configuration.
(Optional)
Copies the running configuration to the startup
configuration.
Purpose
Enters configuration mode.
Specifies a user role and enters role configuration
mode.
Enters role VSAN policy configuration mode.
Specifies a range of VSANs that the role can
access.
Repeat this command for as many VSANs as
needed.
(Optional)
Displays the role configuration.
(Optional)
Copies the running configuration to the startup
configuration.
Purpose
Displays the user role configuration
Displays the feature list.
Displays the feature group configuration.
OL-16597-01