Purging Persistent Fc Ids; Verifying Fcdomain Information - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Cli software configuration guide
Hide thumbs Also See for AP775A - Nexus Converged Network Switch 5010:
Table of Contents

Advertisement

Configuring Domain Parameters

Purging Persistent FC IDs

To purge persistent FC IDs, perform this task:
Procedure
Step 1
Step 2

Verifying fcdomain Information

If the fcdomain feature is disabled, the runtime fabric name in the display is the same as the configured
Note
fabric name.
This example shows how to display information about fcdomain configurations:
switch# show fcdomain vsan 2
Use the show fcdomain domain-list command to display the list of domain IDs of all switches belonging to
a specified VSAN. This list provides the WWN of the switches owning each domain ID. The next example
uses the following values:
• A switch with WWN of 20:01:00:05:30:00:47:df is the principal switch and has domain 200.
• A switch with WWN of 20:01:00:0d:ec:08:60:c1 is the local switch (the one where you typed the CLI
• The IVR manager obtained virtual domain 97 using 20:01:00:05:30:00:47:df as the WWN for a virtual
switch# show fcdomain domain-list vsan 76
Number of domains: 3
Domain ID
---------
0xc8(200)
0x63(99)
0x61(97)
Use the show fcdomain allowed vsan command to display the list of allowed domain IDs configured on this
switch..
switch# show fcdomain allowed vsan 1
Assigned or unallowed domain IDs: 1-96,100,111-239.
[Interoperability Mode 1] allowed domain IDs: 97-127.
[User] configured allowed domain IDs: 50-110.
Ensure that the requested domain ID passes the switch software checks, if interop 1 mode is required in this
switch.
The following example shows how to display all existing, persistent FC IDs for a specified VSAN. You can
also specify the unused option to view only persistent FC IDs that are still not in use.
switch# show fcdomain fcid persistent vsan 1000
OL-16597-01
Command or Action
switch# purge fcdomain fcid vsan vsan-id
switch# purge fcdomain fcid vsan vsan-id
- vsan-id
command to show the domain-list) and has domain 99.
switch.
WWN
-----------------------
20:01:00:05:30:00:47:df [Principal]
20:01:00:0d:ec:08:60:c1 [Local]
50:00:53:0f:ff:f0:10:06 [Virtual (IVR)]
Purpose
Purges all dynamic and unused FC IDs in the
specified VSAN.
Purges dynamic and unused FC IDs in the
specified VSAN range.
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
Purging Persistent FC IDs
495

Advertisement

Table of Contents
loading

Table of Contents