Default Cfs Settings - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Default CFS Settings

Default CFS Settings
The following table lists the default settings for CFS configurations.
Table 32: Default CFS Parameters
Parameters
CFS distribution on the switch
Database changes
Application distribution
Commit
CFS over IP
IPv4 multicast address
IPv6 multicast address
The CISCO-CFS-MIB contains SNMP configuration information for any CFS-related functions. Refer to the
Cisco Nexus 5000 Series MIB Quick Reference for more information on this MIB.
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
314
Using Cisco Fabric Services
Default
Enabled.
Implicitly enabled with the first configuration change.
Differs based on application.
Explicit configuration is required.
Disabled.
239.255.70.83.
ff15::efff:4653.
OL-16597-01