Default Settings For Troubleshooting Features - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Troubleshooting
• show system internal rib system-attributes
• show system internal rib unicast
• show system internal rib vsan-attributes
• show system internal fcfwd fwidxmap if_index
• show system internal fcfwd idxmap interface-to-port
• show system internal fcfwd pcmap
• show platform afm info global
• show platform afm info attachment brief
• show platform afm info group-cfg all
• show platform afm info lop all
• show platform software altos detail
• show platform software altos event-history errors
• show platform software altos event-history msgs
• show platform software altos ports all
• show platform hardware altos counters all
• show platform hardware altos counters interrupts all
• show platform hardware altos interrupts all detail

Default Settings for Troubleshooting Features

The following table lists the default settings for the features included in this chapter.
Table 100: Default Settings for Troubleshooting Features
Parameters
Timeout period to invoke fctrace
Number of frame sent by the fcping feature
Remote capture connection protocol
Remote capture connection mode
Local capture frame limits
FC ID allocation mode
OL-16597-01
Default Settings for Troubleshooting Features
Default
5 seconds
5 frames
TCP
Passive
10 frames
Auto mode
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
697