Authorization Scenario - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Authorization Scenario

Table 91: Authorized Auto-Learning Device Requests
Condition
1
2
3
4
5
6
7
Authorization Scenario
Assume that the port security feature is activated and the following conditions are specified in the active
database:
• A pWWN (P1) is allowed access through interface fc2/1 (F1).
• A pWWN (P2) is allowed access through interface fc2/2 (F1).
• A nWWN (N1) is allowed access through interface fc2/2 (F2).
• Any WWN is allowed access through interface vfc3/1 (F3).
• A nWWN (N3) is allowed access through any interface.
• A pWWN (P3) is allowed access through interface fc2/4 (F4).
• A sWWN (S1) is allowed access through interface fc3/1-3 (F10 to F13).
• A pWWN (P10) is allowed access through interface vfc4/1 (F11).
The following table summarizes the port security authorization results for this active database.
Table 92: Authorization Results for Scenario
Device Connection
Request
P1, N2, F1
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
642
Device (pWWN, nWWN, Requests Connection to
sWWN)
Configured with one or A configured switch port
more switch ports
Any other switch port
Not configured A switch port that is not
configured
Configured or not A switch port that allows
configured any device
Configured to log in to Any port on the switch
any switch port
Not configured A port configured with
some other device
Authorization Condition
Permitted 1
Configuring Port Security
Authorization
Permitted
Denied
Permitted if auto-learning
enabled
Denied ifauto-learning
disabled
Permitted
Permitted
Denied
Reason
No conflict.
OL-16597-01