Configuring and Managing VSANs
About Interop Mode
Interoperability enables the products of multiple vendors to connect with each other. Fibre Channel standards
guide vendors to create common external Fibre Channel interfaces.
Related Topics
•
Displaying Static VSAN Configuration
The following example shows how to display information about a specific VSAN:
switch# show vsan 100
The following example shows how to display VSAN usage:
switch# show vsan usage
4 vsan configured
configured vsans:1-4
vsans available for configuration:5-4093
The following example shows how to display all VSANs:
switch# show vsan
Default VSAN Settings
The following table lists the default settings for all configured VSANs.
Table 74: Default VSAN Parameters
Parameters
Default VSAN
State
Name
Load-balancing attribute
OL-16597-01
Switch Interoperability, page 614
Default
VSAN 1.
Active state.
Concatenation of VSAN and a four-digit string
representing the VSAN ID. For example, VSAN 3 is
VSAN0003.
OX ID (src-dst-ox-id).
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
About Interop Mode
541