Discarding Changes; Committing Changes; Clearing A Fabric Lock; Displaying Cfs Distribution Status - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Configuring Domain Parameters

Committing Changes

To apply the pending domain configuration changes to other SAN switches in the VSAN, you must commit
the changes. The pending configuration changes are distributed and, on a successful commit, the configuration
changes are applied to the active configuration in the SAN switches throughout the VSAN and the fabric lock
is released.
To commit pending domain configuration changes and release the lock, perform this task:
Procedure
Step 1
Step 2

Discarding Changes

At any time, you can discard the pending changes to the domain configuration and release the fabric lock. If
you discard (abort) the pending changes, the configuration remains unaffected and the lock is released.
To discard pending domain configuration changes and release the lock, perform this task:
Procedure
Step 1
Step 2

Clearing a Fabric Lock

If you have performed a domain configuration task and have not released the lock by either committing or
discarding the changes, an administrator can release the lock from any switch in the fabric. If the administrator
performs this task, your pending changes are discarded and the fabric lock is released.
The pending changes are only available in the volatile directory and are discarded if the switch is restarted.
To release a fabric lock, enter theclear fcdomain session vsan command in EXEC mode using a login ID
that has administrative privileges.
switch# clear fcdomain session vsan 10

Displaying CFS Distribution Status

You can display the status of CFS distribution for allowed domain ID lists using the show fcdomain status
command.
switch# show fcdomain status
CFS distribution is enabled
OL-16597-01
Command or Action
switch# configuration terminal
switch(config)# fcdomain commit vsan
vsan-id
Command or Action
switch# configuration terminal
switch(config)# fcdomain abort vsan vsan-id
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
Committing Changes
Purpose
Enters configuration mode.
Commits the pending domain configuration
changes.
Purpose
Enters configuration mode.
Discards the pending domain configuration
changes.
489