Enabling Snmp Notifications - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Enabling SNMP Notifications

The following example shows how to configure a notification target user:
switch(config)# snmp-server user NMS auth sha abcd1234 priv abcdefgh engineID
00:00:00:63:00:01:00:a1:ac:15:10:03
Enabling SNMP Notifications
You can enable or disable notifications. If you do not specify a notification name, Cisco NX-OS enables all
notifications.
Note The snmp-server enable traps CLI command enables both traps and informs, depending on the configured
notification host receivers.
The following table lists the CLI commands that enable the notifications for Cisco NX-OS MIBs.
Table 52: Enabling SNMP Notifications
MIB
All notifications
CISCO-AAA-SERVER-MIB
ENITY-MIB,
CISCO-ENTITY-FRU-CONTROL-MIB,
CISCO-ENTITY-SENSOR-MIB
CISCO-LICENSE-MGR-MIB
IF-MIB
CISCO-PSM-MIB
SNMPv2-MIB
CISCO-FCC-MIB
CISCO-DM-MIB
CISCO-NS-MIB
CISCO-FCS-MIB
CISCO-FDMI-MIB
CISCO-FSPF-MIB
CISCO-PSM-MIB
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
382
Related Commands
snmp-server enable traps
snmp-server enable traps aaa
snmp-server enable traps entity
snmp-server enable traps entity fru
snmp-server enable traps license
snmp-server enable traps link
snmp-server enable traps port-security
snmp-server enable traps snmp
snmp-server enable traps snmp authentication
snmp-server enable traps fcc
snmp-server enable traps fcdomain
snmp-server enable traps fcns
snmp-server enable traps fcs discovery-complete
snmp-server enable traps fcs request-reject
snmp-server enable traps fdmi
snmp-server enable traps fspf
snmp-server enable traps port-security
Configuring SNMP
OL-16597-01