Appendix; Configuration Limits - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Appendix

•

Configuration Limits

The features supported by the Cisco Nexus 5000 Series switch have maximum configuration limits. Some of
these limits apply only when one or more Cisco Nexus 2000 Series Fabric Extender units are attached to the
switch.
The following tables list the Cisco verified limits for Cisco Nexus 5000 Series switches running Cisco NX-OS
Release 4.1.x.
Table 101: Ethernet Environments
Parameter
Active VLANs/VSANs per switch
VLAN/VSAN ID Space
STP Logical Interfaces
MST Instances per bridge topology per switch
VLAN ACLs (VACLs) per switch
Port ACLs (PACLs) per switch
ACL Accounting
Member interfaces per EtherChannel
4 The 3600 logical interfaces apply to both PVRST and MST. If MST is used, the scale applies to the maximum number of MST instances (64).
5 There can be a maximum of 50 ACEs per PACL.
OL-16597-01
Configuration Limits, page 699
A P P E N D I X
Limit
512. 31 are set aside for VSANs and the remaining
are for VLANs.
4,096
4
3,600
64 (IEEE Standard)
1,024
5
256
32
16
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
A
699