Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual page 359

Using Cisco Fabric Services
Physical Fabric
-------------------------------------------------
Switch WWN
-------------------------------------------------
20:00:00:05:30:00:6b:9e
20:00:00:0e:d7:00:3c:9e
Total number of entries = 2
The show cfs peers name command displays all the peers for which a particular application is registered with
CFS. The command output shows all the peers for the physical scope or for each of the valid VSANs on the
switch, depending on the application scope. For physical scope, the switch WWNs for all the peers are indicated.
The local switch is indicated as Local.
switch# show cfs peers name ntp
Scope
-------------------------------------------------
Switch WWN
-------------------------------------------------
20:00:00:44:22:00:4a:9e
20:00:00:05:30:01:1b:c2
The following example show cfs peers name command output displays all the application peers (all switches
in which that application is registered). The local switch is indicated as Local.
switch# show cfs peers name port-security
Scope
-----------------------------------------------------------
Domain
-----------------------------------------------------------
124
98
Total number of entries = 2
Scope
-----------------------------------------------------------
Domain
-----------------------------------------------------------
224
151
Total number of entries = 2
OL-16597-01
IP Address
10.76.100.167
10.76.100.169
: Physical
IP Address
172.22.92.27
172.22.92.215
: Logical [VSAN 1]
Switch WWN
20:00:00:44:22:00:4a:9e
20:00:00:05:30:01:1b:c2
: Logical [VSAN 3]
Switch WWN
20:00:00:44:22:00:4a:9e
20:00:00:05:30:01:1b:c2
[Local]
[Local]
IP Address
172.22.92.27 [Local]
172.22.92.215
IP Address
172.22.92.27 [Local]
172.22.92.215
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
Displaying CFS Distribution Information
313