Flow Statistics Configuration; About Flow Statistics; Counting Aggregated Flow Statistics; Counting Individual Flow Statistics - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Flow Statistics Configuration

Flow Statistics Configuration
Flow statistics count the ingress traffic in the aggregated statistics table. You can collect two kinds of statistics:
• Aggregated flow statistics to count the traffic for a VSAN.
• Flow statistics to count the traffic for a source and destination ID pair in a VSAN.

About Flow Statistics

If you enable flow counters, you can enable a maximum of 1000 entries for aggregate flow and flow statistics.
Be sure to assign an unused flow index for each new flow. The number space for flow index is shared between
the aggregate flow statistics and the flow statistics.

Counting Aggregated Flow Statistics

To count the aggregated flow statistics for a VSAN, perform this task:
Procedure
Step 1
Step 2
Step 3

Counting Individual Flow Statistics

To count the flow statistics for a source and destination FC ID in a VSAN, perform this task:
Procedure
Step 1
Step 2
Step 3
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
590
Command or Action
switch# configuration terminal
switch(config)# fcflow stats aggregated index
value vsan vsan-id
switch(config)# no fcflow stats aggregated index
value vsan vsan-id
Command or Action
switch# configuration terminal
switch(config)# fcflow stats index value
dest-fcid source-fcid netmask vsan vsan-id
switch(config)# no fcflow stats aggregated
index value vsan vsan-id
Configuring Fibre Channel Routing Services and Protocols
Purpose
Enters configuration mode.
Enables the aggregated flow counter.
Disables the aggregated flow counter.
Purpose
Enters configuration mode.
Enables the flow counter.
The source ID and the destination ID
Note
are specified in FC ID hex format (for
example, 0x123aff). The mask can be
one of 0xff0000 or 0xffffff.
Disables the flow counter.
OL-16597-01