Default Settings For Advanced Features - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Advanced Fibre Channel Features and Concepts

Default Settings for Advanced Features

The following table lists the default settings for the features included in this chapter.
Table 88: Default Settings for Advanced Features
Parameters
CIM server
CIM server security protocol
D_S_TOV
E_D_TOV
R_A_TOV
Timeout period to invoke fctrace
Number of frame sent by the fcping feature
Remote capture connection protocol
Remote capture connection mode
Local capture frame limits
FC ID allocation mode
Loop monitoring
Interop mode
OL-16597-01
Default
Disabled
HTTP
5,000 milliseconds
2,000 milliseconds
10,000 milliseconds
5 seconds
5 frames
TCP
Passive
10 frames
Auto mode
Disabled
Disabled
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
Default Settings for Advanced Features
623