Table of Contents
Advertisement
Configuring a Custom Display Message
Related
Documentation
Configuring Date and Time for the EX Series Switch (J-Web Procedure)
Copyright © 2010, Juniper Networks, Inc.
[edit]
user@switch# set chassis lcd-menu menu-item menu-option disable
To enable a menu option:
[edit]
user@switch# delete chassis lcd-menu menu-item menu-option disable
You can configure the second line of the LCD to display a custom message temporarily
for 5 minutes or permanently.
To display a custom message temporarily:
On an EX3200 switch, a standalone EX4200 switch, or an EX8200 switch:
user@switch> set chassis display message message
On an EX4200 switch in a Virtual Chassis configuration:
user@switch> set chassis display message message fpc-slot slot-number
To display a custom message permanently:
On an EX3200 switch, a standalone EX4200 switch, or an EX8200 switch:
user@switch> set chassis display message message permanent
On an EX4200 switch in a Virtual Chassis configuration:
user@switch> set chassis display message message fpc-slot slot-number permanent
NOTE: The
Menu
configured to display a custom message.
To disable the display of the custom message:
user@switch> clear chassis display message
You can view the custom message by issuing the command
LCD Panel in EX3200 Switches
LCD Panel in EX4200 Switches
LCD Panel in EX4500 Switches
LCD Panel in an EX8200 Switch
To configure date and time on an EX Series switch:
Select
Configure
>
System Properties
1.
button and the
button are disabled if the LCD is
Enter
>
Date & Time
Chapter 15: Initial Configuration
.
show chassis lcd
.
205
Advertisement
Chapters
Table of Contents
Troubleshooting
