Show System Autoinstallation Status - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show system autoinstallation status

Syntax
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
show system show system
autoinstallation status autoinstallation status
Copyright © 2010, Juniper Networks, Inc.
show system autoinstallation status
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
(J Series routers and EX Series switches only) Display autoinstallation status information.
This command has no options.
view
show system autoinstallation status on page 137
user@host> show system autoinstallation status
Autoinstallation status:
Master state: Active
Last committed file: None
Configuration server of last committed file: 0.0.0.0
Interface:
Name: fe-0/0/1
State: None
Address acquisition:
Protocol: DHCP Client
Acquired address: None
Protocol: RARP Client
Acquired address: None
Chapter 10: Operational Commands for Software Installation
137