Multicast-Client - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos
Required Privilege
Level
Related
Documentation

multicast-client

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
230
®
OS for EX Series Ethernet Switches, Release 10.4
''status-menu show-version''
on the switch
view-level—To view this statement in the configuration.
control-level—To add this statement to the configuration.
Configuring the LCD Panel on EX Series Switches (CLI Procedure) on page 204
LCD Panel in EX3200 Switches
LCD Panel in EX4200 Switches
LCD Panel in EX4500 Switches
LCD Panel in an EX8200 Switch
multicast-client <address>;
[edit system ntp]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
For NTP, configure the local router or switch to listen for multicast messages on the local
network to discover other servers on the same subnet.
—(Optional) One or more IP addresses. If you specify addresses, the router or
address
switch joins those multicast groups.
Default: .
224.0.1.1
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Configuring the Router or Switch to Listen for Multicast Messages Using NTP
—The version of Junos OS for EX Series switches loaded
Copyright © 2010, Juniper Networks, Inc.