Show System Snapshot - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

For ex series ethernet switches
Table of Contents

Advertisement

Complete Software Guide for Junos

show system snapshot

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
show system snapshot
show system snapshot
media external
media external
314
®
OS for EX Series Ethernet Switches, Release 10.4
show system snapshot
<all-members | local | member member-id>
<media (external | internal)>
<slice (1 | 2 | alternate)>
Command introduced in Junos OS Release 10.0 for EX Series switches.
Display the complete collection of files in a snapshot.
none
—Display the system snapshot on the alternate media, which is the media that does
not have the software packages that last booted the switch.
all-members | local | member member-id
a Virtual Chassis configuration:
all-members
—Display the snapshot for each switch that is a member of the Virtual
Chassis.
—Display the snapshot on the switch that you are currently logged into.
local
member member-id
Virtual Chassis.
—(Optional) Display the destination media location for the
media (external | internal)
snapshot. The
external
device, such as a USB flash drive. The
internal memory source, such as internal flash memory.
slice (1 | 2 | alternate)
—Display the snapshot in a partition:
1
—Display the snapshot in partition 1.
—Display the snapshot in partition 2.
2
alternate
—Display the snapshot in the alternate partition, which is the partition
that did not boot the switch at the last bootup.
view
request system snapshot on page 121
Creating a Snapshot and Using It to Boot an EX Series Switch on page 95
Verifying That a System Snapshot Was Created on an EX Series Switch on page 102
user@switch> show system snapshot media external
Information for snapshot on external (da1s1)
Creation date: Oct 13 20:23:23 2009
JUNOS version on snapshot:
jbase
: 10.0I20090726_0011_user
jcrypto-ex: 10.0I20090726_0011_user
—(EX4200 switch only) Display the snapshot in
—Display the snapshot for the specified member switch of the
option specifies the snapshot on an external mass storage
option specifies the snapshot on an
internal
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junos os 10.4

Table of Contents