Show Cli; Table 32: Show Cli Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show cli

Syntax
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields

Table 32: show cli Output Fields

Field Name Field Description
Capability to complete a partial command entry when you type a space or a tab:
CLI complete-on-space
Maximum time that an individual session can be idle before the user is logged off the router or switch.
CLI idle-timeout
When this feature is enabled, the number of minutes is displayed. Otherwise, the state is
CLI restart-on-upgrade CLI is set to prompt you to restart the router or switch after upgrading the software:
CLI screen-length Number of lines of text that the terminal screen displays.
CLI screen-width Number of characters in a line on the terminal screen.
CLI terminal Terminal type.
CLI is operating in Mode:
CLI timestamp Date and time format for the timestamp. If the timestamp is not set, the state is
CLI working directory Pathname of the working directory.
show cli show cli
Copyright © 2010, Juniper Networks, Inc.
show cli
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display configured CLI settings.
This command has no options.
view
show cli on page 169
Table 32 on page 169 lists the output fields for the
listed in the approximate order in which they appear.
enhanced .
user@host> show cli
CLI complete-on-space set to on
CLI idle-timeout disabled
CLI restart-on-upgrade set to on
CLI screen-length set to 47
CLI screen-width set to 132
CLI terminal is 'vt100'
CLI is operating in enhanced mode
CLI timestamp disabled
CLI working directory is '/var/home/regress'
Chapter 13: Operational Commands for User Interfaces
command. Output fields are
show cli
or .
on off
disabled .
on or off .
disabled .
169