Ipip-Path-Mtu-Discovery; Ipv6-Duplicate-Addr-Detection-Transmits - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

ipip-path-mtu-discovery

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation

ipv6-duplicate-addr-detection-transmits

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Configuring TCP MSS for Session Negotiation
(ipip-path-mtu-discovery | no-ipip-path-mtu-discovery);
[edit system internet-options]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure path MTU discovery for outgoing IP-IP tunnel connections:
ipip-path-mtu-discovery
no-ipip-path-mtu-discovery
Path MTU discovery is enabled.
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Configuring the Junos OS for IP-IP Path MTU Discovery on IP-IP Tunnel Connections
ipv6-duplicate-addr-detection-transmits;
[edit system internet-options]
Statement introduced in Junos OS Release 9.1.
Statement introduced in Junos OS Release 9.1 for EX Series switches.
Control the number of attempts for IPv6 duplicate address detection.
The default value is 3.
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Configuring the Junos OS for IPv6 Duplicate Address Detection Attempts
Chapter 16: Configuration Statements for System Setup
—Path MTU discovery is enabled.
—Path MTU discovery is disabled.
223