Starting The J-Web Interface - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

Starting the J-Web Interface

Related
Documentation
158
®
OS for EX Series Ethernet Switches, Release 10.4
Understanding J-Web Configuration Tools on page 153
You can use the J-Web graphical interface to configure and manage the EX Series switch.
To start the J-Web interface:
Launch your HTTP-enabled or HTTPS-enabled Web browser.
1.
To use HTTPS, you must have installed a certificate on the switch and enabled HTTPS.
After http:// or https://
2.
switch and press .
Enter
The J-Web login page appears.
On the login page, type your username and password, and click
3.
To correct or change the username or password you typed, click
entry or entries, and click
NOTE: The default username is root with no password. You must change
this during initial configuration or the system does not accept the
configuration.
The Chassis Dashboard information page appears.
To explicitly terminate a J-Web session at any time, click
J-Web User Interface for EX Series Switches Overview on page 151
Understanding How to Use the J-Web Interface to View System Information
in your Web browser, type the hostname or IP address of the
.
Log In
Log In .
, type the new
Reset
in the top pane.
Logout
Copyright © 2010, Juniper Networks, Inc.