Monitoring System Log Messages; Administering And Monitoring System Functions - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

CHAPTER 34
Administering and Monitoring System
Functions

Monitoring System Log Messages

Purpose
Action
Table 118: Filtering System Log Messages
Field Function
System Log Specifies the name of a system log file for which you want
File to display the recorded events.
Lists the names of all the system log files that you configure.
By default, a log file,
directory.
Copyright © 2010, Juniper Networks, Inc.
Monitoring System Log Messages on page 641
Checking Active Alarms with the J-Web Interface on page 644
Monitoring Chassis Alarms for an EX8200 Switch on page 644
Monitoring Switch Control Traffic on page 648
Monitoring System Properties on page 650
Monitoring Chassis Information on page 652
Monitoring System Process Information on page 654
Managing Log, Temporary, and Crash Files on the Switch (J-Web Procedure) on page 655
Use the monitoring functionality to filter and view system log messages for EX Series
switches.
To view events in the J-Web interface, select
Apply a filter or a combination of filters to view messages. You can use filters to display
relevant events. Table 118 on page 641 describes the different filters, their functions, and
the associated actions.
To view events in the CLI, enter the following command:
show log
, is included in the
messages
Monitor > Events and Alarms > View Events
Your Action
To specify events recorded in a particular file,
select the system log filename from the list—for
example, messages
Select
Include archived files
/var/log/
files in the search.
.
to include archived
641
.