[Edit Poe] Configuration Statement Hierarchy - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Related
Documentation

[edit poe] Configuration Statement Hierarchy

Copyright © 2010, Juniper Networks, Inc.
}
(flow-control | no-flow-control);
link-mode mode;
(loopback | no-loopback);
}
(gratuitous-arp-reply | no-gratuitous-arp-reply);
mtu bytes;
no-gratuitous-arp-request;
traceoptions {
flag flag;
}
(traps | no-traps);
unit logical-unit-number {
accounting-profile name;
bandwidth rate;
description text;
disable;
family family-name {...}
proxy-arp (restricted | unrestricted);
(traps | no-traps);
vlan-id vlan-id-number;
}
vlan-tagging;
}
}
Configuring Gigabit Ethernet Interfaces (CLI Procedure) on page 1284
Configuring Aggregated Ethernet Interfaces (CLI Procedure) on page 1330
Configuring a Layer 3 Subinterface (CLI Procedure) on page 1339
Configuring Routed VLAN Interfaces (CLI Procedure) on page 1601
Configuring the Virtual Management Ethernet Interface for Global Management of an
EX4200 Virtual Chassis (CLI Procedure) on page 999
EX Series Switches Interfaces Overview on page 1239
See the Junos OS Network Interfaces Configuration Guide.
poe {
guard-band watts;
interface (all | interface-name) {
disable;
maximum-power watts;
priority (high | low);
telemetries {
disable;
duration hours;
interval minutes;
}
}
management (class | static);
Chapter 3: Complete Software Configuration Statement Hierarchy
63